Category: Pages

peendev-markdown

niels

Write your posts and pages in Markdown. Replaces TinyMCE with EasyMDE.

Download

More Info
This plug-in replaces the default ClassicPress editor with the EasyMDE Markdown editor.

Changelog

v1.0.5
- Remove Premium URL from ClassicPress directory headers.
v1.0.4
- Add headers required for ClassicPress plug-in directory.
v1.0.3
- Fix issue where EasyMDE did not show up on post-new.php.
- Add readme.txt with PHP 8.1 requirement.
v1.0.2
- Bundle EasyMDE and highlight.js, allowing for offline use.
- Various small fixes.
v1.0.1
- Use built-in Markdown renderer. (You should remove the azrcrv-markdown plug-in).
- Support Markdown in comments.
v1.0.0 Initial release.
- Support Markdown in Posts and Pages.
Requirements
- ClassicPress >= 1.5
- PHP >= 8.1.0
Installation

No special instructions. Install & activate nielspeen/peendev-markdown. There is no settings page.
Nofollow Post Links

iljester

Nofollow Post Links is a plugin that allows you to manage the nofollow attribute of post links. You can manage them granularly,

Download

More Info
Description

Nofollow Post Links is a plugin that allows you to manage the nofollow attribute of post links. You can manage them granularly, within the single post, or you can assign nofollow attribute to all links, or again, you can remove the attribute for all links.

Compatibility and support

This plugin was designed specifically for ClassicPress. However, it may also be compatible with WordPress if the classic editor is used. In any case, support is limited to ClassicPress installations only.

Installation
1. Upload plugin in the wp-content > plugins directory.
2. Then, install it.
3. Activate.
Thirdy part assets

Nofollow Post Links uses:
- Update client class from plugin (Update Manager)[https://software.gieffeedizioni.it/plugin/update-manager/], released under GPLv2 license. Author Simone Fioravanti.
- github workflows by Simone Fioravanti https://github.com/xxsimoxx
Frequently Asked Questions

Can I choose the links to which I want to nofollow?

Yes, for each post you can establish which links should have nofollows.
You can also globally determine which domains will not be nofollowed.

Is the nofollow attribution definitive?

Here we must distinguish between attribution of nofollow on a “single content” and attribution of nofollow on “all contents” for every post type in your site:
- Attribution on single content. Here the attribution of nofollow or its removal occurs by modifying the content post unless you have set or left the “Same for the metabox action” option set. In this case, see the next point.
- Global attribution. Global attribution works in three ways: “Javascript”, “Content Filter” and “Content Edit”. If you use the “Javascript” or “Content Filter” mode, the original content of the post is not changed. With the “Content Edit” mode, the plugin will write the content of your post. If you choose the “Content Edit” option, remember to make a backup of your database before proceeding.
What is the purpose of Restore Post Settings?

“Restore post setting” is an action that allows the restoration of the configuration via metabox, before the global action is run. This action is particularly useful if you use the “Content Edit” mode. However, please note that if you save the content of your post after a global action in “content edit” mode, a new backup will be generated with the globally assigned settings.

Should I make a database backup before using Nofollow Post Links?

Generally, it is good practice to make a backup before installing and using a plugin on a live site. In the case of Nofollow Post Links, backup is highly recommended if you use the “Content Edit” mode for global actions. This mode is still experimental, and is highly invasive, because edit the post, and since the plugin has not been sufficiently tested on a sufficient number of installations, it becomes essential to create a backup (at least of the wp_posts and wp_postmeta tables.) before executing it, also because the “Restore post settings” action may not be useful in this case.

What is the best mode for global action?

Please note that the “Javascript” mode and the “Content Filter” mode work in the frontend, therefore, although minimal, they will have an impact on the loading of the page. But if you use a caching system, you won’t even notice.
The “Content Edit” mode has no impact on the frontend, because it only edits the post.
The choice is therefore subjective, without prejudice to what has been said in the previous FAQs.

Wait! When I started a global action the metabox disappeared!

Naturally. If you have activated a global dofollow or nofollow action you cannot edit links via the metabox.

What is nofollow mapping?

Nofollow mapping allows you to retrieve nofollows manually inserted into links and update metabox settings. Very useful especially after installing the plugin.

What is the function of harmonize?

Harmonize allows you to simultaneously assign the nofollow attribute to a specific domain or remove the nofollow attribute. It is a global assignment function which however only acts on a specific domain.

Can I create a domains whitelist?

Yes. Simply enter them in the appropriate field in the settings tab, and the global actions will ignore those domains. Additionally, you won’t be able to assign nofollow via the metabox. However, in content edit mode you can assign it manually (but why would you do that?).

Can I choose the post type for global actions?

Yes. From the settings, you can determine which post types you can perform global actions on. You can also decide in which post types to show the post link metabox.

What happens when the plugin is uninstalled?

Any data in the database referring to the plugin will be removed. If you used content edit mode to assign nofollows, they will remain after uninstallation unless you used “Restore Post Settings” or the “Global Dofollow” action before uninstalling the plugin.
FX Builder

Ciprian Popescu

FX Builder is an improved page builder plugin for ClassicPress that provides visual columns in the post editor without using shortcodes.

Download

More Info
FX Builder is a page builder plugin that provides visual columns in the post editor without using shortcodes. From the settings page, you can enable it for posts, pages, and custom post types.

Changelog

= 1.4.1 =
- Fix bottom column selector being displayed as block instead of Flex
= 1.4.0 =
- Fix unescaped variable
- Fix typo in readme.txt
- Add new Settings and Typography options panel
- Add Google fonts and Bunny fonts functionality to TinyMCE’s fontformats array
- Add translatable strings to the Settings page
- Add admin stylesheet
- Update readme.md with helpful links and a short description
- Update ZIP release workflow
- Switch more elements from floats to Flex CSS
- Replace deprecated “resize” function with “resize” event
- Clean up old settings panel (alpha)
- Remove unused filter
- Remove tabbing capability in textarea element
= 1.3.1 =
- Add line height controls
- Add column vertical alignment
- Add 5-column layout
- Add section height controls to create spacers
- Various UI improvements
= 1.3.0 =
- Remove jQuery UI Sortable dependency and replace with SortableJS
- Remove old, unused files
- Update plugin branding to be consistent with “FX Builder”
= 1.2.3 =
- Fix author link
- Add system fonts to TinyMCE
= 1.2.2 =
- Fix undefined variable
- Add image styling to wraps to make sure images are not wider than content
- Remove “Wide” content width, as it’s not relevant, and can be added as a class
= 1.2.1 =
- Add font size presets, custom font size and font weigh to TinyMCE
- Clean up row and item templates
- Clean up front-end styles
- Clean up readme.txt
= 1.2.0 =
- First public release for ClassicPress
= 1.0.2 – 13 Ags 2017 =
- Fix bug: WP 4.8 compat (thanks to nick6352683)
= 1.0.1 – 06 Jan 2017 =
- Fix bug: wp preview remove FX Builder data
- Fix CSS Bug: Tools & CSS button position
- Store _fxb_active in revisions
- Hide “Preview Changes” button in “Publish” meta box when FX Builder is active
- Fix “save_post” hook to fix fatal error bug
= 1.0.0 – 09 Dec 2016 =
- First stable Release
= 1.0.0.beta – 12 Oct 2016 =
- Browser compatibility (Tested with: Firefox, Chrome, IE11, Edge, Android Phone, Tablet)
- Use Admin Color
- UI and UX Improvement
- RTL Support
- Use HTML Class for Front End Output + Update Front CSS
= 1.0.0.alpha3 – 29 Sep 2016 =
- Revision: Revert to Revision now also revert to FX Builder data
- Remove disable editor feature. Simpler Settings
- Change settings option name. You need to re-configure settings
- Page is enabled by default
- Introduce Tools: Export / Import FX Builder data
- Auto focus to editor when open editor modal
- Fix Custom CSS textarea line break
- Fix several small-screen accessibility issue in modal box
= 1.0.0.alpha2 – 23 Sep 2016 =
- Add row with thumbnail for each layoout
- Welcome notice with link to admin page
- Improve overall builder design
- Fix overflow in editor modal
- Add post class “fx-builder-entry” when active
- Reset undo in editor modal
- Custom CSS for each posts
- Other small fixes and improvements
= 1.0.0.alpha – 21 Sep 2016 =
- Initial alpha release
Widget Announcements

azurecurve

Description Announce holidays, events, achievements and notable historical figures in a widget. Announcements can be made: One off Monthly Annually G ...

Download

More Info
Announce holidays, events, achievements and notable historical figures in a widget.

Announcements can be made:
- One off
- Monthly
- Annually
- Good Friday
- Easter Sunday
- Easter Monday
- Monthly on the nth day (e.g. 2nd Wednesday)
- Annually on the nth day of the month (e.g. 4th Thursday November)
Announcements are created as a custom post type and can have details, an image and additional text after the image.

Integrates with To Twitter from azurecurve for automatic tweeting of announcement each time the announcement is made and a retweet after a specified amount of time.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the settings page in the admin control panel (azurecurve menu).
Screenshots
1. Create new announcement in the custom post type.
2. Add widget to widget area and select category.
3. Widget displayed on front end when announcement meets date criteria.
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 1.5.4
- Update readme file for compatibility with ClassicPress Directory.
Version 1.5.3
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 1.5.2
- Update azurecurve menu.
- Update readme files.
Version 1.5.1
- Remove dev code.
Version 1.5.0
- Update translations to escape strings.
- Update azurecurve menu and logo.
Version 1.4.0
- Refactor settings page to be accessible using jQuery UI Tabs.
Version 1.3.0
- Add integration with Toggle Show/Hide from azurecurve for read more toggle in announcements.
- Add uninstall function.
- Refactor settings page.
- Compress banners, icons and screenshots.
- Fix To Twitter integration check.
Version 1.2.3
- Remove extraneous code.
Version 1.2.2
- Fix incorrect default options.
Version 1.2.1
- Fix bug with To Twitter checked.
Version 1.2.0
- Add integration with To Twitter from azurecurve for automatic tweeting and retweeting of announcements.
- Fix bug with population of default options.
Version 1.1.1
- Fix incorrect Download link.
Version 1.1.0
- Update handling of announcement image in widget.
- Add default size for announcement image in widget.
Version 1.0.1
- Fix bug with excerpt label changing for all post types, not just the custom post type.
Version 1.0.0
- Initial release.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / download
- Avatars – details / download
- BBCode – details / download
- Breadcrumbs – details / download
- Call-out Boxes – details / download
- Check Plugin Status – details / download
- Code – details / download
- Comment Validator – details / download
- Conditional Links – details / download
- Contact Forms – details / download
Timelines

azurecurve

Description Create timelines showing the sequence of events and place in any post or page using a shortcode. Timelines create a custom post type for t ...

Download

More Info
Create timelines showing the sequence of events and place in any post or page using a shortcode.

Timelines create a custom post type for timeline entry; timelines are used by adding the [timeline={timeline name}] shortcode

Integrate with Flags and Nearby to display a country flag next to timeline entry.; Nearby is required for the setting of a country on a post or page.

This plugin is multisite compatible; each site will need settings to be configured in the admin dashboard.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the configuration page in the admin control panel (azurecurve menu).
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 1.7.3
- Update readme file for compatibility with ClassicPress Directory.
Version 1.7.2
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 1.7.1
- Update azurecurve menu.
- Update readme files.
Version 1.7.0
- Update translations to escape strings.
- Update azurecurve menu and logo.
Version 1.6.0
- Add width setting for integration with Flags by azurecurve plugin.
Version 1.5.0
- Rename taxonomy to Categories.
- Update azurecurve menu.
- Fix bug in azurecurve menu.
Version 1.4.1
- Fix version number bug.
Version 1.4.0
- Fix plugin action link to use admin_url() function.
- Rewrite option handling so defaults not stored in database on plugin initialisation.
- Update azurecurve plugin menu.
- Amend to only load css when shortcode on page.
Version 1.3.0
- Add Settings to Timelines admin menu.
- Rename Timeline Parents submenu page.
- Amend width of Timeline Link field in Timeline Entry metabox.
- Add plugin icon and banner.
Version 1.2.2
- Fix bug with display of flag when Flags and Nearby installed, but not active.
Version 1.2.1
- Fix bug with display of flag display option.
Version 1.2.0
- Integrate with Flags and Nearby to display a country flag next to timeline entry.
- Fix bug with default timeline parameter when slug not provided.
Version 1.1.6
- Fix bug with undefined index in save metabox function.
Version 1.1.5
- Fix bug with setting of default options.
- Fix bug with plugin menu.
- Update plugin menu css.
Version 1.1.4
- Rewrite default option creation function to resolve several bugs.
- Upgrade azurecurve plugin to store available plugins in options.
Version 1.1.3
- Update Update Manager class to v2.0.0.
- Update action link.
- Update azurecurve menu icon with compressed image.
Version 1.1.2
- Correct problem with version number.
Version 1.1.1
- Fix bug with incorrect language load text domain.
Version 1.1.0
- Add integration with Update Manager for automatic updates.
- Fix issue with display of azurecurve menu.
- Change settings page heading.
- Add load_plugin_textdomain to handle translations.
Version 1.0.1
- Fix bug with css label.
- Update azurecurve menu for easier maintenance.
- Move require of azurecurve menu below security check.
- Localization fixes.
- Fix bug with icon display.
Version 1.0.0
- Initial release for ClassicPress forked from azurecurve Timelines WordPress Plugin.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / download
- Avatars – details / download
- BBCode – details / download
- Breadcrumbs – details / download
- Call-out Boxes – details /
Events

azurecurve

Description Events allows events such as webinars or conferences to be created via a custom post type; categories, excerpt, details, start and end dat ...

Download

More Info
Events allows events such as webinars or conferences to be created via a custom post type; categories, excerpt, details, start and end dates and times and a featured image are all supported.

In the options set defaults for the widget and shortcode.

Multiple widgets can be created, each assigned to display a category; settings for title, image size and limit for number of events to list can be set per widget.

The event shortcode accepts three parameters:
- slug to select specific event.
- width to set the size of the featured image.
- height to set the size of the featured image.
Shortcode usage is [event slug="december-2021" width=150 height=150]; all parameters are optional and will use the defaults set via the settings page if not supplied.

The events shortcode accepts four parameters:
- category to restrict the output to the selected category.
- width to set the size of the featured image.
- height to set the size of the featured image.
- limit to restrict the number of events to display.
Shortcode usage is [events category="webinars" width=150 height=150 limit=5]; all parameters are optional and will use the defaults set via the settings page.

Integrates with To Twitter from azurecurve for automatic tweeting of announcement each time the announcement is made and a retweet after a specified amount of time.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the settings page in the admin control panel (azurecurve menu).
Screenshots
1. Create new event in the custom post type.
2. Add widget to widget area, select category and amend defaults if necessary.
3. Widget displaying events in sidebar.
4. Page showing output of events shortcode.
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder and can also be downloaded from the plugin page on https://development.azurecurve.co.uk; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 1.3.5
- Fix bug with short PHP declaration.
- Add missing Requires PHP tag in plugin header.
Version 1.3.4
- Update plugin header and readme for compatibility with ClassicPress Directory v2.
- Update Update Manager to version 2.5.0.
Version 1.3.3
- Update readme file for compatibility with ClassicPress Directory.
Version 1.3.2
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 1.3.1
- Update azurecurve menu.
- Update readme files.
Version 1.3.0
- Update translations to escape strings.
- Update azurecurve menu and logo.
Version 1.2.2
- Remove extraneous code.
Version 1.2.1
- Fix bug with saving of tweet and retweet days before options.
Version 1.2.0
- Add integration with To Twitter from azurecurve for automatic tweeting and retweeting of events.
Version 1.1.1
- Remove debug code.
Version 1.1.0
- Add no event found message.
- Add option to display widget only when events found.
- Add function to handle multilevel default options correctly.
- Fix bug with default category not working when adding widget.
Version 1.0.1
- Update screenshots.
Version 1.0.0
- Initial release.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / download
- Avatars – details / download
- BBCode – details / download
- Breadcrumbs – details / download
- Call-out Boxes – details / download
- Check Plugin Status – details / download
- Code – details / download
- Comment Validator – details / download
- Conditional Links – details / download
- Contact Forms – details / download
- Disable FLoC – details / download
- Display After Post Content – details / download
- Estimated Read Time – details / [download](https://github.com/azurecurve/azrcrv-estimated-read
Shortcodes Everywhere

Simone Fioravanti

Quickly enable (or disable) shortcodes in any ClassicPress context! Posts, pages, widgets, excerpts, taxonomy descriptions, comments – you decide w ...

Download

More Info
Quickly enable (or disable) shortcodes in any ClassicPress context! Posts, pages, widgets, excerpts, taxonomy descriptions, comments – you decide where shortcodes run!

Shortcodes Everywhere will help you quickly enable shortcodes in any context on your ClassicPress website! Posts, pages, excerpts, widgets, category and tag descriptions – even user comments – you decide where you want shortcodes to run and the plugin takes care of the rest!

Improved Shortcode Control

Shortcodes Everywhere will help you quickly enable shortcodes in any context on your ClassicPress website! Posts, pages, excerpts, widgets, category and tag descriptions – even user comments – you decide where you want shortcodes to run and the plugin takes care of the rest!

Enable or Disable Shortcodes

If you need to disable shortcodes from running in any given context, this plugin has got your back! Not only can you enable shortcodes to run in additional contexts, you can also disable them from running in any of those contexts, too, giving you more control than ever.
If shortcodes are present in a context where they are disabled, nothing will show up: they’re fully stripped.

Quick Setup

Setup will take less than 30 seconds – and that accounts for a 15 second break in the middle! Just check a few boxes and you’re done!

Navigate to Dashboard > Settings > Shortcodes to adjust plugin settings.
- Posts
  Enable or disable shortcodes from running in posts and custom post types.
- Pages
  Enable or disable shortcodes from running in pages.
- Excerpts
  Enable or disable shortcodes from running in post excerpts.
- Widgets
  Enable or disable shortcodes from running in widgets.
- Taxonomies
  Enable or disable shortcodes from running in category and tag descriptions.
- Comments
  Enable or disable shortcodes from running in comments sections.
Page Index

azurecurve

Description Shortcode which displays a simple tile based page index showing the child pages of the loaded page or of the supplied pageid or slug. This ...

Download

More Info
Shortcode which displays a simple tile based page index showing the child pages of the loaded page or of the supplied pageid or slug. This plugin is multisite compatible.

To use simply place the [page-index] shortcode on a page or in a post. Tiled page index based on child pages of the page the shortcode is used on.

If a different page index is required, or the shortcode is used in a post use one of the following parameters:
- pageid
- slug
e.g. [page-index pageid='32'] or [page-index slug='mythology/celtic-fairy-tales']

If both parameters are supplied, then pageid will take precedence and slug will be ignored.

Integrated with Flags plugin to display flag in page index; add custom Flag custom field to page.

Integrated with Icons plugin to display icon in page index; add custom Icon custom field to page.

This plugin is multisite compatible; each site will need settings to be configured in the admin dashboard.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the configuration page in the admin control panel (azurecurve menu).
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder/; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 1.6.3
- Update readme file for compatibility with ClassicPress Directory.
Version 1.6.2
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 1.6.1
- Update azurecurve menu.
- Update readme files.
Version 1.6.0
- Refactor settings page to be accessible using tabs with aria.
- Update translations to escape strings.
- Update azurecurve menu and logo.
Version 1.5.3
- Fix bug with available icons not listing when Icons integration enabled.
Version 1.5.2
- Fix bug with timeline integration.
Version 1.5.1
- Fix bug with timeline signifier not working correctly when integrated with Icons, but no icon selected.
Version 1.5.0
- Integrate with Flags
- Integrate with Icons for icon in page index and timeline signifier.
- Add tabs to settings page.
- Fix bug with plugin active check.
- Update azurecurve plugin menu.
Version 1.4.0
- Fix plugin action link to use admin_url() function.
- Rewrite option handling so defaults not stored in database on plugin initialisation.
- Update azurecurve plugin menu.
- Amend to only load css when shortcode on page.
Version 1.3.1
- Fix bug with incorrect plugin slug declaration for plugin icon and banner.
Version 1.3.0
- Add integration with Timelines from azurecurve.
- Add plugin icon and banner.
- Update generation of page URL to use get_permalink.
- Update CSS to use flexbox instead of line height to handle wrapping within page index tiles.
Version 1.2.5
- Fix bug with pageid parameter not working.
Version 1.2.4
- Fix bug with setting of default options.
- Fix bug with plugin menu.
- Update plugin menu css.
Version 1.2.3
- Rewrite default option creation function to resolve several bugs.
- Upgrade azurecurve plugin to store available plugins in options.
Version 1.2.2
- Update Update Manager class to v2.0.0.
- Update action link.
- Update azurecurve menu icon with compressed image.
Version 1.2.1
- Fix bug with incorrect language load text domain.
Version 1.2.0
- Add integration with Update Manager for automatic updates.
- Fix issue with display of azurecurve menu.
- Change settings page heading.
- Add load_plugin_textdomain to handle translations.
Version 1.1.0
- Add protocol check when constructing page index.
Version 1.0.1
- Update azurecurve menu for easier maintenance.
- Move require of azurecurve menu below security check.
Version 1.0.0
- Initial release for ClassicPress forked from azurecurve Page Index WordPress Plugin.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / [download](https://github.com/azurecurve/azrcrv-a
Nearby

azurecurve

Description Nearby creates a table of nearby locations (pages) based on GPS co-ordinates. Nearby integrates with the following azurecurve plugins: F ...

Download

More Info
Nearby creates a table of nearby locations (pages) based on GPS co-ordinates.

Nearby integrates with the following azurecurve plugins:
- Flags from azurecurve allows a location to be set for a page; this will display the location flag next to the location name in the table of nearby attractions.
- Icons from azurecurve allows an icon to be displayed next to a nearby location which has an entry on a timeline (requires integration with Timelines to be enabled).
- Timelines from azurecurve allows a character (such as *) to be displayed next to a nearby location which has an entry on a timeline.
- Toggle Show/Hide from azurecurve allows the table of nearby locations to be enclosed with a toggle.
Apply the [nearby] shortcode to a page with co-ordinates and nearby locations (pages with co-ordinates), based on the settings, will be displayed in a table.

The shortcode accepts two parameters:
- type to limit nearby attractions (multiple types can be provided in comma separated string).
- title to override the default toggle title.
Example shortcode usage:
```
[nearby type="Distilleries" title="Nearby Distilleries"]
```
Examples of this plugin in action:
- coppr|Distilleries To Visit
- DarkNexus|Tourist Attractions
This plugin is multisite compatible; each site will need settings to be configured in the admin dashboard.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the configuration page in the admin control panel (azurecurve menu).
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder and can also be downloaded from the plugin page on https://development.azurecurve.co.uk; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 3.0.2
- Update readme file for compatibility with ClassicPress Directory.
Version 3.0.1
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 3.0.0
- Migrate type, country and co-ordinates data from cp_postmeta to custom table.
- Change text domain to ensure it is unique.
- Update to only load admin css when on plugin settings page.
- Update readme.txt and readme.md.
- Update azurecurve menu.
Version 2.5.0
- Add uninstall.
- Update azurecurve menu and logo.
Version 2.4.4
- Fix bug with version number.
Version 2.4.3
- Fix bug with call to undefined function on settings page.
- Update azurecurve menu.
Version 2.4.2
- Fix bug with timeline integration not returning correct result.
- Update azurecurve menu.
- Replace azurecurve menu icon with svg.
Version 2.4.1
- Fix bug with available icons not listing when Icons integration enabled.
Version 2.4.0
- Add types; allows attractions to have a type set.
- Add type parameter to shortcode allowing included attractions to be limited.
- Add title parameter to shortcode allowing toggle title to be amended.
- Add plugin links to Integrate settings tab.
- Fix bug with display of selected country in page meta box.
- Fix table display bug when no nearby attractions.
Version 2.3.0
- Amend call to get country flag.
- Add tabs to admin settings page.
- Integrate with Icons for icon to use as timeline signifier.
Version 2.2.0
- Fix plugin action link to use admin_url() function.
- Rewrite option handling so defaults not stored in database on plugin initialisation.
- Update azurecurve plugin menu.
- Amend to only load css when shortcode on page.
Version 2.1.0
- Fix bug in update manager namespace declaration.
- Add integration with Timelines from azurecurve.
- Add plugin icon and banner.
Version 2.0.0
- Correct typo in maximum-location option which was maximim-locations; settings will need to be updated and saved once update applied.
Version 1.2.0
- Add 16 point compass with option to toggle from 32 point compass.
Version 1.1.0
- Add direction for nearby locations using 32 compass points.
- Update CSS to provide more control.
Version 1.0.0
- Initial release.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / [download](https://github.com/azurecurve
Images

azurecurve

Description Shortcode to display image in post; add width, alt, caption or error attributes. Example shortcode: [image image="http://www.example.com/h ...

Download

More Info
Shortcode to display image in post; add width, alt, caption or error attributes.

Example shortcode:
```
[image image="http://www.example.com/hello.png" width="550px" alt="Hello World!"]
```
This plugin is multisite compatible.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the configuration page in the admin control panel (azurecurve menu).
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 1.2.4
- Update readme file for compatibility with ClassicPress Directory.
Version 1.2.3
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 1.2.2
- Update azurecurve menu.
- Update readme files.
Version 1.2.1
- Update azurecurve menu and logo.
Version 1.2.0
- Fix plugin action link to use admin_url() function.
- Add plugin icon and banner.
- Update azurecurve plugin menu.
- Amend to only load css when shortcode on page.
Version 1.1.4
- Fix bug with plugin menu.
- Update plugin menu css.
Version 1.1.3
- Upgrade azurecurve plugin to store available plugins in options.
Version 1.1.2
- Update Update Manager class to v2.0.0.
- Update action link.
- Update azurecurve menu icon with compressed image.
Version 1.1.1
- Fix bug with incorrect language load text domain.
Version 1.1.0
- Add integration with Update Manager for automatic updates.
- Fix issue with display of azurecurve menu.
- Change settings page heading.
- Add load_plugin_textdomain to handle translations.
Version 1.0.1
- Update azurecurve menu for easier maintenance.
- Move require of azurecurve menu below security check.
Version 1.0.0
- Initial release for ClassicPress forked from azurecurve Images WordPress Plugin.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / download
- Avatars – details / download
- BBCode – details / download
- Breadcrumbs – details / download
- Call-out Boxes – details / download
- Check Plugin Status – details / download
- Code – details / download
- Comment Validator – details / download
- Conditional Links – details / download
- Contact Forms – details / download
- Disable FLoC – details / download
- Display After Post Content – details / download
- Estimated Read Time – details / download
- Events – details / download
- Filtered Categories – details / download
- Flags – details / download
- Floating Featured Image – details / download
- From Twitter – details / download
- Gallery From
Conditional Links

azurecurve

Description Conditional links allows shortcodes to be created which will automatically link when a page or blog post exists with the same slug or titl ...

Download

More Info
Conditional links allows shortcodes to be created which will automatically link when a page or blog post exists with the same slug or title. If the conditionally linked page or post exists, the text will be wrapped in anchor tags otherwise plain text will be returned.

The following shortcodes are available:
- cpl for page links.
- cbl for blog post links.
Shortcodes can be used in the following ways:
- [cpl slug="link"]
- [cpl title="this link title"]link[/cpl]
- [cpl slug="link" title="the link title"]
This plugin is multisite compatible.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the configuration page in the admin control panel (azurecurve menu).
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 1.2.4
- Update readme file for compatibility with ClassicPress Directory.
Version 1.2.3
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 1.2.2
- Update azurecurve menu.
- Update readme files.
Version 1.2.1
- Update azurecurve menu and logo.
Version 1.2.0
- Fix plugin action link to use admin_url() function.
- Rewrite option handling so defaults not stored in database on plugin initialisation.
- Add plugin icon and banner.
- Update azurecurve plugin menu.
- Amend to only load css when shortcode on page.
Version 1.1.6
- Fix bugs with links to non-existent post/page showing slug instead of title or content.
Version 1.1.5
- Fix bug with setting of default options.
- Fix bug with plugin menu.
- Update plugin menu css.
Version 1.1.4
- Rewrite default option creation function to resolve several bugs.
- Upgrade azurecurve plugin to store available plugins in options.
Version 1.1.3
- Fix version number bug.
Version 1.1.2
- Update Update Manager class to v2.0.0.
- Update action link.
- Update azurecurve menu icon with compressed image.
Version 1.1.1
- Fix bug with incorrect language load text domain.
Version 1.1.0
- Add integration with Update Manager for automatic updates.
- Fix issue with display of azurecurve menu.
- Change settings page heading.
- Add load_plugin_textdomain to handle translations.
Version 1.0.1
- Update azurecurve menu for easier maintenance.
- Move require of azurecurve menu below security check.
- Localization fixes.
Version 1.0.0
- Initial release for ClassicPress forked from azurecurve Conditional Links WordPress Plugin.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / download
- Avatars – details / download
- BBCode – details / download
- Breadcrumbs – details / download
- Call-out Boxes – details / download
- Check Plugin Status – details / download
- Code – details / download
- Comment Validator – details / download
- Contact Forms – details / download
- Disable FLoC – details / download
- Display After Post Content – details / [download](https://github.com/azurecurve/azrcrv-display-after-post-content/rele
Remove Revisions

azurecurve

Description While revisions can be disabled or limited in number with settings in the wp-config file, there is no way to allow for the deletion of rev ...

Download

More Info
While revisions can be disabled or limited in number with settings in the wp-config file, there is no way to allow for the deletion of revisions over a certain ago. That is what this plugin allows you to do.

In the options you can set the number of months after which revisions are to be deleted. They can then be deleted at the click of a button or via a cron job running on a daily schedule.

The options also allow you to select the post types (both standard and custom) which can have revisions removed.

Removal of revisions is done using the ClassicPress function to ensure they are done correctly.

This plugin is multisite compatible, with options set on a per site basis.

Installation
- Download the latest release of the plugin from GitHub.
- Upload the entire zip file using the Plugins upload function in your ClassicPress admin panel.
- Activate the plugin.
- Configure relevant settings via the configuration page in the admin control panel (azurecurve menu).
Frequently Asked Questions

Can I translate this plugin?

Yes, the .pot file is in the plugins languages folder and can also be downloaded from the plugin page on https://development.azurecurve.co.uk; if you do translate this plugin, please sent the .po and .mo files to [email protected] for inclusion in the next version (full credit will be given).

Is this plugin compatible with both WordPress and ClassicPress?

This plugin is developed for ClassicPress, but will likely work on WordPress.

Changelog

Version 1.2.3
- Update readme file for compatibility with ClassicPress Directory.
Version 1.2.2
- Fix Update Manager View Details link (contributed by xxsimoxx).
- Fix bug with display of plugin action link.
Version 1.2.1
- Fix missing constants.
Version 1.2.0
- Update plugin list.
- Remove revisions from list of post types which are eligible for having revisions removed.
- Remove jQuery which should not have been included.
- Fix incorrect update server path; **plugin will need to be manually updated if 1.1.0 was installed.
Version 1.1.0
- Refactor code to improve maintainability.
- Update language file.
- Update Update Manager to version 2.4.3.
- Add option of selecting range of days/months (was previously only months).
Version 1.0.5
- Update readme files.
- Update language template.
- Fix bug with azurecurve menu.
Version 1.0.4
- Update azurecurve menu.
- Update readme files.
Version 1.0.3
- Fix bug with plugin icon and banner not displaying.
Version 1.0.2
- Fix version number issue.
Version 1.0.1
- Fix incorrect text domain.
Version 1.0.0
- Initial release.
Other Notes

azurecurve was one of the first plugin developers to start developing for ClassicPress; all plugins are available from azurecurve Development and are integrated with the Update Manager plugin for fully integrated, no hassle, updates.

The other plugins available from azurecurve are:
- Add Open Graph Tags – details / download
- Add Twitter Cards – details / download
- Avatars – details / download
- BBCode – details / download
- Breadcrumbs – details / download
- Call-out Boxes – details / download
- Check Plugin Status – details / download
- Code – details / download
- Comment Validator – details / download
- Conditional Links – details / download
- Contact Forms – details / download
- Disable FLoC – details / download
- Display After Post Content – details / download
- Estimated Read Time – details / download
- Events – details / download
- Filtered Categories – details / download
- Flags – details / download
- Floating Featured